Visualizza la versione completa : CellLogs 8s Nuovi una coppia per totale 16S

24-07-2014, 10:40
Vendo coppia (anche separatamente) di cellLogs ( versione con memoria interna)


http://www.jun-si.com/UploadFiles/20095230491801.jpg (http://www.jun-si.com/UploadFiles/20095230491801.jpg)




Cell Voltage Monitor & Logger


Cell Volt Monitor / Logger


http://www.jun-si.com/Images/smallbook.jpg CONTENT


Lithium (LiPo/LiIo/LiFe) battery cell count

2 – 8 series

Pack voltage range

4.0 – 43.0VDC
(USB can provide lower voltage 1.0V)

Alarm pack voltage range

0.1 – 4.3VDC

Cell voltage range

1.3 – 4.9VDC

Alarm cell voltage range

1.3 – 4.9VDC

Voltage display resolution


Current loading of test


Maximum voltage for alarm port


Current drain for alarm port


Log Files storage

16Mbit (36 hours)

Sample logging time interval

2 seconds

PC Connect

USB port



Dimensions (L *W * D)



Special features

Small size with multiple functions, backlight 128*64 lattices LCD and Buzzer Tone Reminder; the interface can be operated smoothly.
CellLog 8S can not only measure 2-8S Li battery individual voltage, but also measure NiMH, NiCd, Pb battery pack voltage.
It can be set Individual Voltage Alarm and Pack Voltage Alarm, Overvoltage Alarm, Low Voltage Alarm, Differential Voltage Alarm and Time Over Alarm. What’s more, the extra alarm output can be linkage controlled by the users.
It has 8 sets default monitor alarm settings, which can be selected for different battery packs.
CellLog 8S has been 100% calibrated before it enters to the market, at the same time, it supports the calibration by users themselves.
CellLog 8S has a 16Mbit flash storage, which can log offline data in 36 hours.
Support upgrading the hardware program by USB port. The CellLog 8S also supports the “logview” software and can display, plot and analyze the charge and discharge data by it. (See detail information about logview in the following website: LogView (http://www.logview.info))

User's Manual (http://www.hillrc.com/UploadFiles/CellLog_8S.pdf)





LiPo/LiIo/LiFe: 2-8 series
Pack Voltage Range: 4.0-4.3V
Alarm Pack Voltage Range: 0.1-4.3V
Cell Voltage Range: 1.3-4.9V
Alarm Cell Voltage Range: 1.3-4.9V
Voltage Display Resolution: 1mV
Current Loading of Test: 8mA
Maximum Voltage for Alarm Port: 50V
Current Drain for Alarm Port: <500mA
Log Files Storage: 16Mbit (36 hours)
PC Connection: USB port
Weight: 18g
Dimensions (LxWxD): 62x39x12 mm

24-07-2014, 10:51
in vendita anche sulla baia

cell logs 8s logger | eBay (http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=231290407641)

05-08-2015, 08:40
Ne è rimasto solo uno. dai, prezzo di realizzo